이 모듈은 다른 모듈과 다르게 Serial WiFi라는 특징을 가지고 있습니다.
HC-06처럼 AT명령어를 이용하여 사용하며 핀도 8개밖에 없습니다.
ESP8266은 TCP/IP 프로토콜 스택을 내장한 SOC(단일 칩 시스템)입니다. 어떤 마이크로 컨트롤러라도 WIFI에 접속할 수 있도록 도와줍니다. 각 모듈은 AT 커멘드를 이용하여 동작하며 와이파이 쉴드나 장치 없이 쉽게 아두이노에 연결할 수 있습니다. ESP8266은 VoIP를 위해 APSD를 지원합니다. 자동 RF 보정을 포함하고 있으며 외부 RF 부품이 필요하지 않습니다. ESP8266은 커뮤니티의 많은 도움이 지원되고 있으며 아래의 Documents 부분에서는 사용을 위한 지원을 받을 수 있을 것입니다. 이 장치가 IOT 솔루션으로 널리 사용되길 바랍니다.
주의 : 이 모듈은 5-3V 컨버터가 내장되어 있지 않습니다. 외부 로직 컨버터를 이용하여 변환이 필요합니다.
절대 5V를 바로 연결하지 마십시요.
로직컨버터 : http://mechasolution.com/shop/goods/goods_view.php?goodsno=1427&category=001009
특징
802.11 b/g/n
내장 TCP/IP 프로토콜 스택
내장 TR 스위치, balun(balanced-to-unbalanced transformer), LNA(low-noise amplifier), 전원 증폭기
802.11b 모드에서 +19.5dBm 출력
내장 저전력 32-bit CPU를 프로세서로 사용 가능
SDIO 1.1 / 2.0, SPI, UART
관련 문서
This is WiFi serial transceiver module, based on ESP8266 SoC.
The SOC has Integrated TCP/IP protocol stack
We have a set of documents in Chinese. We are preparing tutorials and demo software to showcase utility of this module.
Please buy this module only when you understand the existing documents.
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
Corresponding Interface:
SDIO 2.0, SPI, UART
32-pin QFN package
Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
Integrated RISC processor, on-chip memory and external memory interfaces
Integrated MAC/baseband processors
Quality of Service management
I2S interface for high fidelity audio applications
On-chip low-dropout linear regulators for all internal supplies
Proprietary spurious-free clock generation architecture
Integrated WEP, TKIP, AES, and WAPI engines
Specification:
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
+19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 1.1/2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
Resource
Software:
Documents
Please visit our
wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our
forum.
For any technical support or suggestion, please kindly go to our forum.