E-Max 35A V2

1Specification
1.1 Output : Continues 350 A, Burst 40 A up to 10 Secs
1.2 Input Voltage : 5.6V --- 16.8V ( L ithium : 2s ~ 4s or NiMH/NiCd 5 -12 Cells)
1.3 BEC (Battery Elimination Circuit) Output ： linear mode BEC 3A / 5V
1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
1.5 Size ： 28mm*45mm*12mm (width*length*height)
1.6 Weight : 38g
1.7 Packaging include:
3 sets of gold plated motor connectors and heat-shrink tubings
(Remark: motor connectors and heat-shrink tubings need to be purchased additionally)

2 Features
2.1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after
batteryconnected.
This will prevent any injury happened.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity,
fully compatible with all market available transmitters.
2.3 Programmable Items :
∵ Brake Settings ： brake enabled / brake disabled, default is brake disabled
∵ Battery Type ： Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd) ， default is Li-xx.
∵ Low Voltage Protection Mode(Cutoff Mode) ： power reducing / power cutoff, default is power reducing.
∵ Low Voltage Protection Threshold(Cutoff Threshold) ：
low / medium / high, default is medium cutoff voltage.
1) For Li-xx battery ， number of battery cells are judged automatically ，
low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly,
when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.
2) For Ni-xx battery, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage
(0% means the low voltage cutoff protection function is disabled) .
For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V,
when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V.
∵ Startup mode: normal / soft / super-soft, default is normal startup.
∵ Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors.
But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above.
For higher speed, High timing could be used.
2.4 Full P rotection F eatures: Low-voltage cutoff protection / over-heat protection / throttle signal
lost protection.
3 Advantages
3.1 Military Standard Capacitor with extremely low resistance used on voltage input section,
this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.
3.2 Extreme low resistance, super current endurance.
3.3 Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.