Advance plus 33A (DLP33A++)

PWM	Thickness	Width	Length	Weight
8KH	7	23	42	22g
Model	BEC	Lipo	NiCD/NiMH	Prog Device
DL33A+	2amp	2-3	6-10	Prog card
DLP33A+	2amp	2-3	6-10	PC/ USB
DL33A++	3amp	2-4	6-10	Prog card
DLU33A+	-	2-3	6-10	Prog card

Features:

1. Easy setting; easy operation

2. Safe start-up system.
The motor won’t be started no matter which position the throttle stick is on when the battery is connected

3. Automatic power cut-off.
When the motor stops rotating or the radio signal loses for more than 3 seconds, the power will automatically be cut off.

4. BEC (2.0 amps) provides power to receiver and servos (for ESC with BEC)

5. High rate switching Pulse Width Modulation (PWM): 8KHZ

6. Over-heat protection. The power will be cut-off as it is heated up to 110℃

7. Over-voltage protection. The motor won't be started if the voltage is higher than 18V (Expect for the OPTO series.)

8. Low-voltage cut-off. 3.0V/2.7V (selectable) for Li-ion/Li-polymer battery; 0.9V/0.7V (selectable) for Ni-CD/Ni-MH battery

9. Timing mode. Timing low mode- providing highest efficiency suitable for motors with 2, 4, 6 poles; Timing high mode-providing highest rotation speed & biggest current suitable for motors with 6 or more poles and outrunning motors.

10. Programming Card: Programming can be done on the programming board easily.