※ 별도 조립이 필요한 반제품입니다.
구매전 유의해 주세요
** 본제품으로 RF리모콘을 구현하실려면 옵션제품인 RX433을 구매하셔야 합니다.
가격은 15,000원입니다.
RX433 모듈을 탑재해서 원격 제어로 쓰실 경우 별도의 프로그램이 필요하지 않습니다.
RS232를 통한 제어를 하실 경우 별도의 프로그램과 어드레스 지정이 필요합니다.
This relay card can be used in several ways : stand alone card, addressed by switches or open collector outputs or remote controlled through RS232. In option remote controlled using RF (radio frequency) signals (K8058 remote control + RX433 module). Since the card can be addressed using RS232 commands, you may write custom applications in any programming language on any platform. Test software can be downloaded from our web site.
Features
- DIAGNOSTIC / TEST SOFTWARE:
- separate relay on/off test with moment or toggle function
- clear all / set all relays function
- address selection: up to 255 cards can be selected
- emergency stop for all cards
- minimum system for test software:
- Pentium class CPU
- Windows 95 or higher
- mouse and free RS232 port
Specifications
- 8 high quality relay contacts: 5A/230Vac max.
- relay outputs are transient suppressed using VDRs
- LED confirmation on each relay contact
- 8 drive inputs to use with open collectors or regular switches
- RS232 input to drive the card with computer or terminal: baud rate: 2400, no parity, 8 data bits, 1 stop bit, high or low impedance selection (10K or 1K)
- optional RF driving possibility using RX433 type module (not simultaneous with RS232) together with K8058 eight channel RF remote control
- power output: unregulated 12Vdc / 200mA
- power supply: 12Vac / 500mA (including 12V output)
- diagnostic software downloadable from our site
- dimensions: 160 x 107 x 30mm (6.3" x 4.2" x 1.2")
*RX433
Features
- no adjustments required
- stable output
- suitable for remote controls, telemetry, ...
Specifications
- range: 200m in open air
- frequency: 433MHz
- modulation: AM
- sensitivity: 3µVrms
- power supply: 4.5-5.5Vdc
- digital and linear output
- pin numbers: ◦1: gnd ◦2: digital output ◦3: linear output ◦4: Vcc ◦5: Vcc ◦6: gnd ◦7: gnd ◦8: antenna (30-35cm)