타이니두이노에서 BLE를 사용하기 위한 모듈입니다. 블루투스 4.0으로도 알려져 있으며 IOS(블루투스 4.0 탑재 필요)나 4.3 이상 버전의 안드로이드 장치(기기에서 지원해야함)에서 사용이 가능합니다.
Bluegiga BLE112 모듈을 장착하고 있으며 최대 10m정도까지 무선통신이 가능합니다.
전원 장치와 레벨 시프터가 있어 3.0 ~ 5.0V에서 사용이 가능합니다.
Bluegiga에서 몇몇의 예제를 제공하고 있지만 앱 개발이 가능한 전문 지식을 갖추는 것을 추천합니다.예제 : here특징
마스터, 슬레이브 모드 지원8개의 연결 지원GAP, GATT, L2CAP, SMP 지원송신 전력 : +3dBm ~ -23 dBm수신 감도 : -93dBm소비 전력 : 27mA (0dBm), 슬립모드시 0.5 uA크기 : 20mm x 29mm무게 : 2.25g0번, 1번핀을 UART로 사용Product Description
This TinyShield is based around the Bluegiga BLE112
module and lets you connect your projects using
Bluetooth 4 Low Energy (also known as Bluetooth Smart),
which is supported on newer phones (like the iPhone
4s, and 5). This technology is great for low power
sensors and accessories.
Includes power supply and level shifters on
the board, so you can run your TinyDuino from 3.3V – 5V.
Specifications
- Bluetooth v. 4.0, single mode compliant
- Supports master and slave modes
- Supports up to eight connections
- Integrated Bluetooth Smart stack
- GAP, GATT, L2CAP, SMP
- Bluetooth Smart profiles
- Radio performance
- TX power: +3 dBm to -23 dBm
- Receiver sensitivity: -93 dBm
- Ultra low current consumption
- Transmit: 27mA (0 dBm)
- Sleep mode 3: 0.5 uA
- Ultra compact size and weight
- Rectangular Version: 20mm x 29mm
- (.787 inches x 1.142 inches)
- Max Height
- (from lower bottom TinyShield Connector
- to upper top TinyShield Connector): 5.11mm (0.201 inches)
- Weight: TBD grams (TBD ounces)
- UART Mode used
- Arduino pins 0 – 1 used by this shield
- (the standard hardware UART lines)
- Built in level shifters and linear power supply
- to allow your TinyDuino to run up to 5.0V operation.
Design Files