AC Current 20A/200A/2000A 55mmφ CT
Model 2100 (CE)
Digital Clamp Tester. Model 2100 (CE)

FEATURES

  • Wide current measurements with tear drop type 55mmφCT up to 2000A.
  • Data-hold and Auto power off function.
  • Additional AC/DC voltage resistance diode test continuity check.
  • Conform to IEC safety requirements.
≫ Catalog PDF
SPECIFICATIONS
Safety standard:IEC 61010-1 IEC 61010-2-032
Installation CategoryⅡ600V or CategoryⅢ300V.
E.M.C. standard:EN 61326
Measuring method:Dual slope integration mode
Display:3.5 digit LCD max. reading of 1999
Jaw opening capability:55mmφ
Over range indication:Blanking of all digits except MSD 1
Low battery indication:"Battery" mark on LCD
Data hold indication:"DH" mark on LCD
Sampling:2 times/sec
Withstanding voltage:AC 3700V 1 minute max. (Between the core of CT and outer case)
Operating temperature:0℃ to 40℃ 80%RH max. ( Without condensation )
Storage temperature:-10℃ to 60℃ 70%RH max. ( Without condensation )
Power supply:1.5V (AM-4 LR03 or AAA)×2
Power consumption:3.5mW
Auto power off:Approx. 10 minutes later after power on
Battery life:Approx. 500 hours continuous
Size:85(W)×240(H)×34(D)mm
Weight:Approx. 350g
Accessories:
Hard carrying case:1
Instruction manual:1
Test lead:1set
Batteries:2
Accuracy:(23℃±5℃ 80%RH or less)
FunctionRangeAccuracyMaximum input
AC A (50/60Hz)
Manual ranging		20A±1.2% rdg ±10 dgtAC2000A
(30 second)
200A±1.2% rdg ±10dgt
2000A±1.2% rdg ± 8 dgt
AC V (50/60Hz)
DC V
Auto ranging		2V±0.7% rdg ± 5 dgtDC 600V
or
AC 600V rms
20V±1.2% rdg ± 5 dgt
200V±1.2% rdg ± 5 dgt
600V±1.2% rdg ± 5 dgt
Resistance(Ω)
Auto ranging		200Ω±1.2% rdg ± 5 dgtInput protection
250V rms
(30 second)
2kΩ±1.2% rdg ± 5 dgt
20kΩ±1.2% rdg ± 5 dgt
200kΩ±1.2% rdg ± 5 dgt
2000kΩ±1.2% rdg ± 5 dgt
20MΩ±3.0% rdg ±10 dgt
Continuity check2kΩBeeper < Approx. 300Ω250V rms
Diode test2V±10% rdg ± 3dgt250V rms